Hostaphan® 2SLK Coated Polyester Film
A film with moderate haze; that is silicone coated on one side. Along with high strength, flexibility, and chemical resistance, this product provides excellent slip and good dimensional stability over a wide temperature range. Not FDA approved.

PROPERTY
UNIT OF MEASURE
TYPICAL VALUE
TEST METHOD
Area Yield

in2•mil/lb.
19,800
ASTM D 4321

m2•mm/kg
717

Tensile Strength
MD
psi
30,000
ASTM D 882

kg/cm2
2,100

Yield Strength (F5)
MD
psi
15,000
ASTM D 882

kg/cm2
1,050,

Ultimate Elongation
MD
%
115
ASTM D 882
Modules
MD
psi
550,000
ASTM D 882

kg/cm2
38,700

Coefficient of Friction A/B
(Kinetic)
-
0.20
ASTM D 1894
Shrinkage
MD
%
1.5
30 min. at 150°C
TD

0.4

Density

g/cm3
1.395
ASTM D 1505
Total Haze
92 gauge
7.5%
7.5
ASTM D 1000

142 Gauge
10.5%
10.5

SILICONE FUNCTIONALITY
Smear
g/in
3 to 10
T-peel from em 610 and TESA 415 tape @ 12 in./min.

10 to 30
T-peel from BOPP/Getva 1753 adhesive @ 12 in./min.
Smear
-
None
Haze observed when rubbed once with index finger
Rub-off
-
None
Coating removed when rubbed hard with index finger
Migration
-
None
Effect on tackiness of 3M 610 tape after contact with silicone coating
Re-adhesion
%
>95
Peel force of TESA 4154 tape to stainless steel after contact with silicone coating

* Values are for reference only. Contact your Pilcher Hamilton Sales Representative for actual gauges available.

CONDITIONS: Determination of the suitability of the material to the use contemplated is the user’s responsibility. Users assume all risks resulting from the use of our products and must confirm adaptability through their own tests. Liability will in no event exceed value of the material sold.
Hostaphan® is the registered trademark of the Mitsubishi Polyester Film Co.
IEGPF_007_Hostaphan_2SLK
4/99